Network - SMC Networks WiShare SMCWTVA100 User Manual

To access the remote, see
N :
OTE
Figure 62: Setup Main Page
Use the navigation buttons on the remote to select the Network menu and
N
ETWORK
click OK. The following menu items are available:
Wired Connection—Select this item to change the SMCWTVA100
■
IP settings to either DHCP or Fixed IP.
Device Name—Select this option to set a new device name for the
■
SMCWTVA100. Note the default name is always: SMCWTVA100 xxx.
WIFI Connection—In Bridge to Wireless mode select this option to
■
connect the SMCWTVA100 to a Wi-Fi access point.
Virtual AP Setup—Use this menu item to change the
■
SMCWTVA100's wireless access point settings such as:
radio band (2.4 or 5 GHz)
●
wireless security (disabled or WPA/WPA2)
●
wireless security password
●
"Setup Using the OSD Menu" on page 67"
– 68 –
| Operation Modes
C 5
HAPTER
Setup Using the OSD Menu