Web Configuration; Network Topology And Settings; Quick Setting; Network Settings - SMC Networks WiShare SMCWTVA100 User Manual

6
N T
ETWORK OPOLOGY AND
Q S
UICK ETTING
N S
ETWORK ETTINGS
W C
EB ONFIGURATION
This chapter describes how you can use the built-in Web User Interface
(Web UI) to configure the following SMCWTVA100 settings:

Network Topology and Settings

■
Wireless Configuration
■
Display Output Setting
■
Web UI Password
■
Mode Setting
■
The Web UI also provides additional functions:
Status
■
Configuration
■
Remote
■
Restart
■
S
ETTINGS
You can configure how the SMCWTVA100 is connected to your local
network and whether to use DHCP or statically configure the IP settings.
You will be automatically directed to the Quick Setting menu when your
SMCWTVA100 is new or you have reset to factory configuration. Use this
menu to configure the SMCWTVA100 to connect to a local LAN over either
wireless or Ethernet. See the section
how to use this menu item.
If you want to connect your SMCWTVA100 to a local LAN, use this menu to
configure its IP settings.
– 71 –
"" on page 19 for more information on