Using The Smc Wlan Configuration Tool (Windows) - SMC Networks SMCWUSB-N4 User Manual

3 Using the SMC WLAN Configuration Tool
After you install the Windows driver for your SMCWUSB-N4 300 Mbps Wireless USB
Adapter, the SMC WLAN configuration tool launches automatically each time you boot your
computer. Using this tool, you can configure your Adapter.
Some configuration tasks are performed when the Adapter is in Station Mode, while other
tasks are performed when the Adapter is in AP Mode. You select the mode using the SMC
WLAN configuration tool.
The topics covered in this chapter are:
Accessing the SMC WLAN Configuration Tool (page 31)

SMC WLAN Configuration Tool Main Screen (page 31)

Understanding the Adapter's Operating Modes (page 32)

Viewing Wireless Network Status (page 34)

Performing a Site Survey (page 36)

Managing Profiles (page 37)

Viewing Statistics (page 40)

Enabling WPS-Compliant Devices (page 41)

Configuring SSID, Wireless Mode, and Channel (page 43)

Configuring Security Settings (page 45)

Using Access Control (page 47)

Viewing Adapter Information (page 49)

SMCWUSB-N4 300 Mbps Wireless USB Adapter User Manual
30
(Windows)