Satellite Radio Tuner Control Features; Select Satellite Radio Mode; Switching Seek Mode; Select The Channel - Kenwood KDC-MP635 Instruction Manual

Satellite Radio tuner control features

Select Satellite Radio Mode

Selecting the Satellite Radio Tuner (optional
accessory) connected to this unit.
Selecting Satellite Radio Mode
Press the [SRC] button.
Select the "SAT" display.
Refer to <Selecting the Source> (page 7).
⁄
• You need to register to the service provider to receive
the service by Satellite Radio. Consult the service
provider if "CALL TO SUBSCRIBE" appears.
• The radio may take a little time to start receiving after
you select the Satellite Radio source.
• If the signal reception fails, "Acquiring Signal" appears.
28
|
English
1 - 6
FNC
Band display
Function icon
SRC Control knob
Channel number

Switching Seek Mode

Sets the seeking mode.
Press the [AUTO] button.
Each time you press the button, the Seek mode
alternates between the operations shown in the
table below.
Display Operation
"Seek : Channel" Normal manual seeking control.
"Seek : Preset" Search in order of the channels in the Preset
memory.

Select the channel

Selecting the channel.
Push the Control knob towards [4] or [¢].
AUTO
FM
AM