Speaker Setting; Subwoofer Output; Tel Mute; Function Control Mode - Kenwood KDC-MP635 Instruction Manual

General features

Speaker Setting

Fine-tuning so that the System Q value is optimal
when setting the speaker type.
1
Enter Standby
Press the [SRC] button.
Refer to <Selecting the Source> (page 7).
Select the "STANDBY" display.
2
Enter Speaker Setting mode
Press the [VOL] knob.
"SP SEL" is displayed.
3
Select the Speaker type
Turn the [VOL] knob.
Each time you turn the knob, the setting alternates
between the settings shown in the table below.
Speaker type
OFF
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
4
Exit Speaker Setting mode
Press the [VOL] knob.

Subwoofer Output

Turning the Subwoofer output ON or OFF.
Push the Control knob toward down for at least
2 seconds.
Each time you push the knob, Subwoofer output
switches ON and OFF.
When it is ON, "SUB WOOFER ON" is displayed.

TEL Mute

The audio system automatically mutes when a call
comes in.
When a call comes in
"CALL" is displayed.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The "CALL" display disappears and the audio system
comes back ON.
10
|
English
Display
"OFF"
"5/4inch"
"6x9/6inch"
"O.E.M."
When the call ends
Hang up the phone.
The "CALL" display disappears and the audio system
comes back ON.
⁄
• To use the TEL Mute feature, you need to hook up
the MUTE wire to your telephone using a commercial
telephone accessory. Refer to <Connecting Wires to
Terminals> (page 44).

Function Control mode

To set up various functions of this unit, select tree-
structured function items.
1
Enter Function Control mode
Press the [FNC] button.
2
Select your desired setup item
Select a setup item using the Control knob.
Operation type Operation
Movement between items Turn the Control knob.
Selection of item Press the Control knob.
Return to previous item Press the [FNC] button.
Functions of items are as follows:
Display Icon Function of setup item
"Menu" "MENU" Allows you to set up the environment. Refer
to <Menu system> (page 32).
"Display Select" "DISP" Allows you to set up the display. Refer to
page 11 to page 18.
"Preset Memory" "P.MEM" Allows you to put stations in the memory.
Refer to <Station Preset Memory> (page
22).
"File Scan" etc. "SCAN" Allows you to set how to play the CD and
etc. audio file. Refer to <Play function of CD
and Audio file> (page 26).
"Return"
" Returns to the previous item.
"
3
Select an option for the selected item
Refer to the related pages for the operation of
each option.
4
Exit Function Control mode
Press the [FNC] button for at least 1 second.