Operating the base station on the PABX/router
Operating on the router
When operating the Gigaset on an analogue port of a router, you can reduce problems with echoing by activating the
¢
XES Mode (
page 24). If you have no problems with echoing, this function should be deactivated.
Operating on the PABX
The following settings are only necessary when your PABX requires them, see the user guide for your PABX.
When entering the digits, enter them slowly one after the other.
Setting recall
P#Q5#1Q
¤
§Menu§
3 = 400 ms; 4 = 250 ms; 5 = 300 ms; 6 = 600 ms; 7 = 800 ms
Changing pause after line seizure
You can set the length of the pause inserted between pressing the talk key
P#Q5#1L
¤
§Menu§
¤
¤
§OK§
.
enter number
Changing the pause after the recall key
P#Q5#12
¤
§Menu§
¤
3 = 3200 ms
enter number
¤
The number for the current recall flashes: 0 = 80 ms; 1 = 100 ms; 2 = 120 ms;
¤
The number for the current pause length flashes: 1 = 1 sec.; 2 = 3 sec.; 3 = 7 sec.
¤
The number for the current pause length flashes: 1 = 800 ms; 2 = 1600 ms;
¤
§OK§
.
18
¤
¤
§OK§
enter number
c
and sending the phone number.
.