Enabling Or Disabling The Bluetooth Function; Returning To The Factory Settings - Yamaha YVC-1000 User Manual

Enabling or disabling the Bluetooth
function
When not using a Bluetooth connection, you can disable
the Bluetooth function. To use a Bluetooth connection
again, enable the Bluetooth function.
■
Disabling the Bluetooth function
When the product is in standby mode, press the power
button ( ) while holding down the Bluetooth button
( ) and the volume - button (
Be sure to hold down the Bluetooth button (
volume - button ( ) button until the power-on
operation is completed (until buttons other than the
power button ( ) also light up green).
When the Bluetooth function is disabled, you will be
notified by voice guidance.
■
Enabling the Bluetooth function
When the product is in standby mode, press the power
button ( ) while holding down the Bluetooth button
( ).
Be sure to hold down the Bluetooth button (
the power-on operation is completed (until buttons other
than the power button (
When the Bluetooth function is enabled, you will be
notified by voice guidance.
).
) and the
) until
) also light up green).

Returning to the factory settings

Return the settings of the product to the factory settings.
If this operation is performed, Bluetooth pairing
information is also erased.
When the product is in standby mode, press the power
button ( ) while holding down the tuning fork button
( ) and the volume - button (
turn the product on.
Be sure to hold down the tuning fork button (
the volume - button (
operation is completed (until buttons other than the
power button ( ) also light up green).
If various settings are reset to their factory defaults, you
will be notified by English voice guidance.
) at the same time to
) and
) button until the power-on
30