Controls And Functions; Control Unit (Yvc-Ctu1000) - Yamaha YVC-1000 User Manual

Control Unit (YVC-CTU1000)

■
Top
7
1
Power button/indicator (
Press to turn the product on. Press and hold the power
button for two or more seconds to enter standby mode.
2
Volume +/- button/indicator (
Press to adjust the speaker volume. Hold down the
appropriate button for 0.5 or more seconds to
continuously increase or decrease the volume.
Press both the + and - buttons (
for two or more seconds to switch the output device
between the built-in and external speakers. (→ page 28)
3
Volume level indicator
It normally indicates the input level of an incoming
voice. It indicates settings when adjusting the speaker
volume or when selecting an output speaker. (→ page 6)

Controls and functions

1 2 3
4
)
It lights up or flashes orange if there is a problem. If a
problem is indicated, press the tuning fork button (
to activate the voice guidance about the detected
problem.
)
When it is pressed and held for two or more seconds, the
product automatically measures acoustic conditions and
tunes the audio settings to an optimal condition
(automatic audio tuning). (→ page 25)
) simultaneously
5
Press to pair or connect with a Bluetooth-based
smartphone or tablet.
If this button is pressed while being connected to a
Bluetooth device, Bluetooth will be disconnected.
6
Placing an NFC (Near Field Communication)-equipped
Bluetooth compatible smartphone or tablet over this
function allows you to pair or connect it with the
product, or to disconnect it.
7
Outputs an incoming voice.
4 5 6
Tuning fork button/indicator (
Bluetooth button/indicator (
NFC logo (N-Mark)
Built-in speaker
)
)
)
4