General Safety Regulations - Hensel Expert Pro User Manual

Proper use
Improper use
HENSEL-VISIT International GmbH
3

General safety regulations

Compact flash systems store electrical energy in
capacitors by applying high voltages. These form a
source of danger, which must be carefully excluded.
Besides general rules on handling electrical appliances,
the following safety measurements must be observed.
Therefore read and comply the safety hints (also see
paragraph Starting up) within the user manual before
turning the appliance on.
The present compact flash unit is meant for studio use
of professional photographers. Its task is to provide
electrical energy for HENSEL flash lighting.
The appliance may not be used for any other purpose
than that described above, especially not for other
electrical appliances.
Halogen lamps and flash tubes generate high
pressure during operation and can therefore burst.
For this reason it is a must to protect pilot and flash
light with the supplied, correctly installed HENSEL
protection glass dome. The glass dome is available
in different versions. The use of the glass dome
changes the color temperature.
 Contact with the capacitor voltage is perilous, and
therefore opening of the case of Expert / Integra Pro
compact flash units and repairs must only be made
by authorized customer service.
 Expert / Integra Pro compact flash units are
equipped with a user-replaceable flash tube.
Exchange of flash tube and modeling lamp must
only be per-formed with the appliance turned off,
unplugged from the mains and discharged.
 Compact flashes must only be used on supply lines
(mains) with working protective conductor (earth
line).
User manual // Expert / Integra Pro (Plus)
7