Freemask Transmitter (Optional) - Hensel Expert Pro User Manual

User manual // Expert / Integra Pro (Plus)
22
Technical data*
Type:
Code No.:
Sync socket:
Sync. voltage /
Sync. current:
Switching ON/OFF
Channels:
Sync plug:
Serial port:
Shutter time for
synchronization:
Dimensions in cm
[inch]
(width x length x
height):
Weight (no battery):
Weight (with battery):
Type of battery:
Battery life:
Range:
Frequency:
*: This product conforms to the radio standards ETSI EN300220 and
FCC15.231
FREEMASK (optional)
Channel selection:
An additional function is available, when selecting the
channel (click flash energy regulator 13 once): the
channels F1, F2, and F3 can be set additionally,
besides the channels C1, C2, and C3.
When using the compact flash units for normal lighting
of a set with the channels C1, C2, and C3, you can
trigger the flash via radio remote, adjust the modelling
light, and set the flash power via radio remote control,
just like you have been used to so far.
Transmitter
T4 / 6V
3950
2,5 mm jack plug,
Mono
3V /
< 1mA for 5 µs
--------------------
3, selected by sliding switch
--------------------
--------------------
1/250 s
5,5 x 6,3 x 4,8
[2.2 x 2.5 x 1.9]
53 g
28L / 6V, 1 pc.
1 - 2 years
> 40 m (131 feet) free visibility
433,92 MHz
HENSEL-VISIT International GmbH
Receiver
3951
--------------------
</= 56 V /
--------------------
by applying sync
voltage
6,3 mm jack plug,
plus pole front
mini DIN socket
8 pol.
6,5 x 3,7 x 14,1
[2.6 x 1.5 x 5.6]
84 g
157 g
AA, 3 pcs.
approx. 6 months