Radio Control Unit; Strobe Wizard Plus - Hensel Expert Pro User Manual

13
3:
AUDIO

Strobe Wizard Plus

Set (Code 3952)
HENSEL-VISIT International GmbH
the first digit shows the hundreds, the second digit the
tens. The units are truncated:
 display 05  number of flashes triggered between
50 and 59
 display 15  number of flashes triggered between
150 and 159
Reset of the flash counter is done by pressing the flash
power control switch 13. The menu can be left by re-
peated press of the AUDIO button 3. After 5 sec. the
menu closes automatically.
9 Radio Control System
Proper use – improper use
The transmitter of the HENSEL radio flash trigger and
power control system Strobe Wizard Plus is used for
triggering flashes, adjusting the flash power and
switching the
FULL/OFF/PROP in HENSEL flash units with built-in
receiver (Plus versions of the Expert / Integra Pro
series) via radio signal.
For all other units of the Expert / Integra Pro series not
equipped with a built-in receiver, HENSEL-VISIT offers
the usage of an external receiver as accessory. In
connection with the radio transmitter flashes can be
triggered, but additional features like flash power
adjustment and changing modeling light options are not
available.
Every use of the equipment that differs from its
prescribed use is prohibited. In particular, controlling of
electronical items or machines other than described
above is prohibited.
Scope of delivery
The radio transmitter (Code No. 3950) as well as the
set of radio transmitter and receiver (Code No. 3952)
comes with a synchronization cable with 2,5 mm
synchronization plug.
User manual // Expert / Integra Pro (Plus)
modeling lamp between
19