Menu system
Function of the KDC-MPV7020/KDC-6020
Switching preout
Switching the preout between the rear and non-fading. (In non-
fading it outputs without effect from the fader control.)
Display
"SWPRE R"
"SWPRE NF"
News Bulletin with Timeout Setting
It switches automatically when a news bulletin starts even if the
radio isn't being listened to. Also, the time interval when
interrupt is prohibited can be set.
Display and Setting
"NEWS OFF"
"NEWS 00M"
"NEWS 90M"
When "NEWS 00M" — "NEWS 90M" is set, the News Bulletin
Interrupt function is ON.
When it's ON, the "NEWS" indicator is ON.
When the news bulletin starts, "NEWS" is displayed, and it
switches to the news bulletin.
• If you choose the "20M" setting, further news bulletins will not be
received for 20 minutes once the first news bulletin is received.
• The news bulletin volume is the same level that was set for traffic
information (page 15).
• This function is only available if the desired station sends PTY-code
for news bulletin or belongs to <Enhanced Other Network>-
Network sending PTY-code for news bulletin.
• When the News Bulletin Interrupt function is ON, it switches to an
FM station.
Setting
Rear preout.
Non-fading preout.
Function of the KDC-5020R
— 28 —
Local Seek <In Tuner mode>
Only stations whose reception is good are searched for in auto
seek tuning.
Display
"LO.S OFF"
"LO.S ON"
Tuning Mode <In Tuner mode>
Sets the tuning mode.
Tuning mode
Display
Auto seek
"AUTO 1"
Preset station seek "AUTO 2"
Manual
"MANUAL" Normal manual tuning control.
Function of the KDC-MPV7020/KDC-6020/KDC-5020R
Auto Memory Entry <In Tuner mode>
For the operation method refer to <Auto Memory Entry> (page
14/ 19).
Function of the KDC-MPV7020/KDC-6020/KDC-5020
CRSC (Clean Reception System Circuit)
Temporarily have reception switched from stereo to mono to
reduce multi-path noise when listening to the FM station.
Function of the KDC-5020R
Setting
The local seek function is OFF.
The local seek function is ON.
Function of the KDC-5020R
Operation
Automatic search for a station.
Search in order of the stations
in the Preset memory.
<In FM reception>