Tuner Features (Kdc-5020R); Tuning; Direct Access Tuning - Kenwood KDC-5020 Instruction Manual

Tuner features
Function of the KDC-5020R
¢
SRC FM MENU
OFF
DAB
PTY MENU
AUD
LOUD
4
AM
ST indicator
Band display Frequency display
SCAN RDM REP M.RDM DISP NAME TI
#1 – 6
Preset station number

Tuning

Selecting the station.
1
Select tuner source
Press the [SRC] button.
Select the "TUNER" display.
2
Select the band
Press the [FM] or [AM] button.
Each time the [FM] button is pressed it switches between the
FM1, FM2, and FM3 bands.
3
Tune up or down band
Press the [4] or [¢] button.
During reception of stereo stations the "ST" indicator is ON.
Direct Access Tuning (Function of remote)
Entering the frequency and tuning.
1
Select the band
Press the [FM] or [AM] button.
2
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote.
"– – – –" is displayed.
3
Enter the frequency
Press the number buttons on the remote.
Example:
Desired frequency
92.1 MHz (FM)
810 kHz (AM)
Canceling Direct Access Tuning
Press the [DIRECT] button on the remote.
— 13 —
Press button
[#0], [#9], [#2], [#1]
[#0], [#8], [#1], [#0]