Dod Uid Settings - Microscan HE40T Quick Start Manual

FIGURE 1–27.
All 1D On

DoD UID Settings

The HE40T unit complies with MIL-STD-130, ISO 15434, and
ISO 15418 to construct a Unique Items Identifier (UII), Current
Port Number (CPN), and Lot/Batch Number (LBN).
The following UID data output options are applicable to Data
Matrix only and have no effect on other symbologies:
• UII/CPN DM On — The HE40T is configured to construct
Unique Item Identifier (UII), Current Part Number (CPN), and
Lot/Batch Number (LBN). If there is a valid UII/CPN/LBN, a
UII/CPN/LBN string is outputted. For decoded Data Matrix
with invalid UII/CPN/LBN, HE40T stops image acquisition
without an output string.
• UII/CPN DM with Data Fields — The HE40T is configured to
construct UII/CPN/LBN with all the data fields.UII DM with
Data Field — The HE40T is configured to construct UII and
output additional data fields.
The following options apply to all symbologies:
• UII/CPN On for All Symbologies — The HE40T is configured
to construct UII/CPN/LBN for all symbologies. For decoded
symbologies without valid UII/CPN/LBN, the HE40T stops
image acquisition without an output string.
• UII/CPN Off — The HE40T is back to normal decoder
behavior without constructing UII/CPN/LBN.
Rev 2.0.0, Jan 2009
Symbology Programming Codes (Continued)
All 1D Off
HE40T Quickstart Guide
Save Settings
17