Table of Contents
Advertisement
Restoring Default Names
1.
If you want to restore all the factory default names,
use ▲ or ▼ to highlight Default All located between
channel 88
and Exit. Use ▲ or ▼to highlight Yes
A
then press ENTER to restore all the original names. A
double beep sounds to confi rm the action.
2.
To restore only one name to default, highlight the
channel by using ▲ or ▼then press ENTER. Then
use ▲ or ▼ to next highlight Default.
Using the TripleWatch or DualWatch Mode
During setup of your VHF150, you have selected Triple or
DualWatch mode. The following shows you
how to use this valuable feature.
1.
To activate TripleWatch, from the
main marine screen, press and
hold 16/9/TRI for about 2 seconds.
The screen displays TRIWATCH
at the bottom and the radio begins
to check two additional channels in
rapid sequence every 2 seconds:
the currently selected marine chan-
nel, the backup calling channel 9,
then the Coast Guard/Distress/Hail-
ing channel 16, before starting with
the current channel again.
2.
If you selected DualWatch during
setup, when activated, the radio fi rst checks the cur-
rent channel then it checks channel 16 before return-
ing to the current marine channel. DUALWATCH ap-
pears on the display bottom during this cycle.
3.
To exit either mode, press and hold 16/9/TRI for
about 2 seconds.
36
West Marine VHF150 Radio Owner's Manual
Hide quick links:
Advertisement
Table of Contents
