Changing Channel Names - West Marine VHF 150 Owner's Manual

2. Once you locate the code for your county or area,
use ▲ or ▼ until the correct number appears on the
screen then press ENTER to select it.
3. Enter all the codes you wish, then move to EXIT and
ENTER to select it. The radio returns to the RADIO
MENU screen.
4. Press MENU again to return to the marine mode.

Changing Channel Names

Each channel has a default name which
you can change. When a channel is allo-
cated to a specifi c service, changing the
name on your radio can help make iden-
tifi cation faster and easier. Or you can
change the name to a member of your boating family such
as MOMS CHANNEL. You can use up to 16 characters.
1. From the RADIO MENU, press ▲ or ▼ to highlight
Channel Name.
2. Press ENTER. Use ▲ or ▼ to
scroll to the desired channel you
wish to rename. Press ENTER.
Then choose Rename , Default, or
Exit. and select it.
3. If you choose Rename, press either ▲ or ▼ until the
fi rst letter or number of the new name appears. Press
ENTER to select it and move to the
next character.
4.
When the name is complete, re-
peatedly press ENTER until the
cursor reaches the right end of the
line. Then press ENTER again. A double beep sounds
confi rming the change and the display returns to the
Channel Name menu. Use ▲ or ▼ to Exit and press
ENTER.
West Marine VHF150 Radio Owner's Manual 35