Usa/Can/Int (U.i.c.) - Settings; Lamp (Backlight) Adjust - West Marine VHF 150 Owner's Manual

USA/CAN/INT (U.I.C.) — Settings
The radio is set as a factory default to the USA channel
frequencies. To change to either Canadian [CAN] or Interna-
tional [INT] channels follow these steps.
1. Press MENU and highlight USA/
CAN/INT. Press ENTER.
2. Press either ▲ or ▼ until the coun-
try Mode is highlighted. Press EN-
TER to select it.
3. Highlight EXIT to exit the menu then press ENTER to
return to radio operation.
Note: the radio remembers the last selection setting you make
when powered down.

Lamp (Backlight) Adjust

The backlight that provides conve-
nient illumination of the keys and the
LCD has three settings.
1. Press ▲ or ▼ to scroll to
Lamp Adjust. Press ENTER.
LAMP ADJUST appears at the top of the screen.
Highlight either Always Off, Always On, or Timer.
2. Press ENTER to select your choice.
3. To set the on-time duration of the backlight, select
Timer then highlight either 5 seconds (default), 30
seconds, 1 minute, or 5 minutes then press ENTER. A
double beep sounds to confi rm your selection.
4. Scroll to EXIT and press ENTER to return to the RA-
DIO MENU menu screen.
West Marine VHF150 Radio Owner's Manual 29