Advertisement
Touchmonitor Connections
1. Connect the DVI to HDMI or VGA video cables between the monitor's HDMI/VGA input connectors
and your DVI/VGA video source, respectively. Tighten the video cable's screws for best
performance.
2. Connect the USB touch cable between the monitor's USB connector and your PC's USB port.
3. Connect the audio cable between the monitor's Audio In jack and your audio source.
4. Select the correct power cable for your region. Connect the cable between the AC power source
and the power adapter's input connector. Connect the power adapter's DC output connector to the
monitor's input power jack.
5. Reinstall the cable cover and secure with appropriate screws. Cables can be routed inside the
stand – remove and replace the stand cable cover for access and routing.
6. The touchmonitor ships in an OFF state. Press the power button to turn it on
© 2014 Elo Touch Solutions, Inc. All rights reserved.
User Manual – 1929LM
SW200158 Rev A
-
Page 14 of 31
Advertisement
