Axiohm A758 Setup Manual

Axiohm A758 Setup Manual

Thermal receipt and impact slip printer
Hide thumbs Also See for A758:

Advertisement

Quick Links

A758 Thermal Receipt and
Impact Slip Printer

Setup Guide

TM
A758-D110

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the A758 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Axiohm A758

  • Page 1: Setup Guide

    A758 Thermal Receipt and Impact Slip Printer Setup Guide A758-D110...
  • Page 2: Introducing The A758 Printer

    A758 Setup Guide Introducing the A758 Printer The A758 is an extremely fast, quiet, and reliable point-of-sale printer. It consists of two specialized printers in one compact package: a thermal printer on top that prints receipts, and an impact slip printer in front to print on forms and checks that you insert.
  • Page 3: Remove The Packing Restraints

    A758 Setup Guide Remove the Packing Restraints Front Cover Cardboard Support Carriage Foam Restraint 1. Open the front cover, remove the foam restraint holding the carriage. 2. Remove the cardboard support from the slip path. Receipt Cover Paper Roll Supports...
  • Page 4: Connecting The Cables

    A758 Setup Guide Connecting the Cables Caution: Connect the cables to the printer before plugging in the power supply. If power is received from the host computer, turn it off before connecting any cables. Strain Relief Back of Communication Cash...
  • Page 5: Loading Receipt Paper

    A758 Setup Guide Loading Receipt Paper 1. Tear off the end of the roll so that the edge is loose. 2. Place the roll into the paper bucket with the paper unrolling from the bottom of the roll, and with a few inches of paper extending over the cabinet front.
  • Page 6: Putting In The Ribbon Cassette

    A758 Setup Guide Putting In the Ribbon Cassette 1. Unwrap and tighten the ribbon by turning the knob on the cassette in the direction of the arrow. Front Cover Knob Ribbon Cassette (Shown in Position) Cassette Caution: Do not remove Mylar shield.
  • Page 7: Testing The Printer

    A758 Setup Guide Testing the Printer The Configuration Menu allows you to set general printer parameters. The test prints a list of various printer settings and partially cuts the paper if a knife is installed. The test printout may vary depending on the printer model.
  • Page 8: Setup Complete

    A758 Setup Guide 1. To run the test, either a. Open and close the receipt cover while holding down the Paper Feed Button, b. Press the Paper Feed Button and the Reset Button at the same time. 2. When the printer begins printing let go of the Paper Feed Button.
  • Page 9 100-240 Vac, 1.5/0.8 A, 50/60 Hz, output rated 24 Vdc, 2.3 A. Use of this product with a power supply other than the Axiohm power supply will require you to test the power supply and Axiohm printer for FCC and CE mark certification.

Table of Contents