Configuring The Mail Server - SonicWALL SSL-VPN 2000 Administrator's Manual

Log > Settings
Define the severity level of log messages that will be identified as syslog, event log or alert
Step 10
messages in the Log & Alert Categories region of the Log > Settings page. Log categories
are organized from most to least critical. If a category is selected for a specific logging service,
then that log category and more critical events will be logged. For example, if the Error radio
button is selected for the Event Log service, then all Emergency, Alert, Critical, and Error events
will be stored in the internal log file.
Click Accept to update your configuration settings.
Step 11

Configuring the Mail Server

In order to receive notification email and to enable to the One Time Password feature, it is
imperative that you configure the mail server from the Log > Settings page. If you fail to
configure your mail server prior to using the One Time Password feature, you will receive an
error message:
For information about configuring the One Time Password feature, refer to
Password Overview" section on page
To configure the mail server, perform the following steps:
Log in to the SonicWALL SSL VPN management interface using administrator credentials.
Step 1
Navigate to Log > Settings.
Step 2
Type the email address where you want logs sent to in the Email Events Logs to field.
Step 3
Type the email address where you want alerts sent to in the Email Alerts to field.
Step 4
Type the IP address for the mail server you will be using in the Mail Server field.
Step 5
Type the email address for outgoing mail from your SonicWALL SSL-VPN appliance in the Mail
Step 6
From Address field.
Click Accept in the upper right-hand corner.
Step 7
260 SonicWALL SSL VPN 4.0 Administrator's Guide
28.
"One Time