SonicWALL SSL-VPN 2000 Administrator's Manual page 253

Users > Local Groups
Select LDAP from the Authentication Type menu. The LDAP domain configuration fields will
Step 2
be displayed.
Enter a descriptive name for the authentication domain in the Domain Name field. This is the
Step 3
domain name users will select in order to log into the SonicWALL SSL VPN user portal. It can
be the same value as the Server address field.
Enter the IP address or domain name of the server in the Server address field.
Step 4
Enter the search base for LDAP queries in the LDAP baseDN field. An example of a search
Step 5
base string is CN=Users,DC=yourdomain,DC=com.
It is possible for multiple OUs to be configured for a single domain by entering each OU on
Tip
a separate line in the LDAP baseDN field. In addition, any sub-OUs will be automatically
included when parents are added to this field.
Do not include quotes ("") in the LDAP BaseDN field.
Note
Enter the common name of a user that has been delegated control of the container that user
Step 6
will be in along with the corresponding password in the Login user name and Login password
fields.
When entering Login user name and Login password, remember that the SSL-VPN
Note
appliance binds to the LDAP tree with these credentials and users can log in with their
sAMAccountName.
Enter the name of the portal in the Portal name field. Additional layouts may be defined in the
Step 7
Portals > Portals page.
240 SonicWALL SSL VPN 4.0 Administrator's Guide