Disposal/Recycling Of Inverter - Wagan Elite 400W Pure Sine User Manual

Elite 400w dc to ac pure sine inverter
Table of Contents

Advertisement

PROBLEM: Inverter Shut Down – Fault LED Lit
Reason
Equipment being operated draws too
much power.
PROBLEM: Continuous Buzzing Sound
Reason
Input voltage below 10.5 volts
Poor or weak battery condition.
Poor or loose cable connection
Inadequate power being delivered to
the inverter or excessive voltage drop.

Disposal/Recycling of Inverter

Electronic products are known to contain materials that are toxic if improperly
disposed. Contact local authorities for disposal and recycling information.
Wagan and wagan.com are trademarks used by Wagan Corporation
User's Manual—Read before using this equipment
Solution
Use a higher wattage inverter or do not
use this equipment.
Solution
Keep input voltage above 10.5 volts
Recharge or replace battery.
Inspect terminals and tighten all con-
nections.
©2010 Wagan Corporation
All Rights Reserved
Use heavier gauge DC cable.
Keep cable length as short as
possible.
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Elite 400w2201

Table of Contents