Elite 400W Pure Sine Inverter by Wagan Tech
Troubleshooting
PROBLEM: Low or No Output Voltage – Fault LED Lit
Reason
Poor contact with battery, inverter
terminals or DC socket.
PROBLEM: No Output Voltage – No LEDs Lit
Reason
Fuse blown
PROBLEM: Inverter is Shut Down – Fault LED Lit
Reason
Battery voltage below 10 volts
Inverter is too hot (thermal shut down
mode).
10
Solution
Clean terminals thoroughly. Reinstall
and tighten. Clean DC socket with non-
metallic abrasive emery stick.
Solution
Check vehicle's Accessory Socket Fuse
and if blown, replace with the same
type and rating fuse.
Solution
Charge or replace battery.
•
Allow inverter to cool.
•
Check for adequate ventilation.
•
Reduce the load on the inverter to
rated continuous power output.
www.wagan.com