Timer Operation - Kenwood DPF-J5020 Instruction Manual

Timer operation

As this unit incorporate the timer standby function, play-
back can be started at desired moment if a commercially
available audio timer is combined with this unit.
Preparation
÷ Load discs in the carousel.
÷ Close the door panel.
÷ Connect the system components so that
their power can be switched on by the timer.
÷ Read the instruction manual of the timer
carefully.
1
Set the power switches of the system compo-
nents to the ON positions.
2
Select the disc to be played.
1 Select the disc number.
DISC SKIP
DOWN
Previous disc
Within 8 seconds!
2 Play the disc.
ENTER
6
3
Set the listening volume.
1 Adjust the volume on the amplifier or receiver.
2 Stop playback.
4
Set the timer for the desired ON time.
5
Set the TIMER PLAY switch to ON.
TIMER PLAY
OFF
0
!
UP
Next disc
Main unit
ON
Audio timer
Amplifier or receiver
This unit
÷ The disc number can be selected directly by using the DISC SELECTOR
and numeric keys in place of the DISC SKIP keys.
÷ Read the instruction manual of the timer carefully.
÷ When the set time comes, playback will start automatically.
÷ The playback mode will be TRACK mode.
Timer operation
DPF-J5020 (En)
12:00 To AC outlet
Audio cord
29