Table of Contents
Advertisement
Timer operation
As this unit incorporate the timer standby function, play-
back can be started at desired moment if a commercially
available audio timer is combined with this unit.
Preparation
÷ Select the Player A.
÷ Connect the system components so that
their power can be switched on by the timer.
÷ Read the instruction manual of the timer
carefully.
1
Set the power switches of the system compo-
nents to the ON positions.
2
Select the disc to be played.
1 Select the disc number.
DISC SKIP
DOWN
Previous disc
Within 8 seconds!
2 Play the disc.
ENTER
6
3
Set the listening volume.
1 Adjust the volume on the amplifier or receiver.
2 Stop playback.
4
Set the timer for the desired ON time.
5
Set the TIMER PLAY switch to ON.
TIMER PLAY
OFF
ON
(Player A only)
*
UP
Next disc
Main unit
Audio timer
Receiver or Amplifier
This unit
÷ The disc number can be selected directly by using the DISC SELECTOR
and numeric keys in place of the DISC SKIP (DOWN/UP) buttons.
÷ If the selected disc is being played on Player B, blinking "DISCXXX
BUSY!" is displayed. In this case, either stop Player B and select the
same disc again, or select another disc.
÷ Read the instruction manual of the timer carefully.
÷ When the set time comes, playback will start automatically.
÷ The playback mode will be TRACK mode.
12:00
To AC outlet
Audio cable
27
Advertisement
Table of Contents
