Repeated Playback; To Repeat Only The Programmed Tracks - Kenwood DPF-1010 Instruction Manual

Repeated playback

Preparation
÷ Load a disc in the CD player.
16
™

To repeat only the programmed tracks

1
2
Press the numeric keys as shown below...
To enter track No. 25: 005
Go to step 3 within 5 seconds.
3
4
5
6
To cancel repeated playback
Press so that the "PGM" indicator lights.
P.MODE
Do this operation in the stop mode.
Select the desired track No.
1 2 3
4 5 6
7 8 9
+
0 10
Set the entry.
P.MODE
Repeat steps 2 and 3 above.
Switch REPEAT ON.
REPEAT
Start playback.
PLAY/PAUSE
6
Press the REPEAT key again.
REPEAT
@
: Keys and control used in the operations described on this page.
Lights up.
PGM
0 1
÷ All of the programmed tracks will be repeated.
÷ In case only one track is programmed, only that track will be repeated.
÷ Up to 20 tracks can be programmed. When "
more tracks can be programmed.
Lights up.
PGM
0 1
Goes off.
PGM
0 1
DPF-3010/2010/1010 (En)
The figure shows an example for the DPF-3010
TRACK
NO.
REPEAT
TRACK
NO.
REPEAT
TRACK
NO.
7 6
4 ¢
1 ¡
FULL
" is displayed, no