Repeated Playback; To Repeat Only The Programmed Tracks - Kenwood DP-R6090 Instruction Manual

Repeated playback

Preparation
÷ Load a disc in the CD player.
16
™

To repeat only the programmed tracks

1
REMOTE CONTROL UNIT
RC-P0601
2
REMOTE CONTROL UNIT
RC-P0601
Go to step
3
REMOTE CONTROL UNIT
RC-P0601
4
REMOTE CONTROL UNIT
RC-P0601
5
6
REMOTE CONTROL UNIT
RC-P0601
The current status is displayed when the key is
pressed once.
When it is pressed while the status is displayed, the
repeat ON status can be set to OFF (or vice versa).
7
REMOTE CONTROL UNIT
RC-P0601
To cancel repeated playback
Press the REPEAT key twice.
(REPEAT ON
REMOTE CONTROL UNIT
RC-P0601
Press so that the "PGM" indicator
lights.
P.MODE
Select the disc.
DISC SELECTOR
1 2 3
4 5
3
within 8 seconds.
Select the desired track number.
1 2 3
4 5 6
7 8 9
0 +10
4
Go to step within 8 seconds.
Set the entry.
P.MODE
2 4
Repeat steps – above.
Switch REPEAT ON.
REPEAT
Start playback.
6
OFF)
REPEAT
REMOTE CONTROL UNIT
RC-P0601
: Keys and control used in the operations described on this page.
P G M 1 0 D
÷ All of the programmed tracks will be repeated.
÷ In case only one track is programmed, only that track will be repeated.
÷ Up to 32 tracks can be programmed. When "
more tracks can be programmed.
R E P E A
DP-R7090/R6090 (En)
I S ? C
FULL
" is displayed, no
T ON