Download  Print this page

Kenwood CD-2280M Instruction Manual

Kenwood multiple compact disc player instruction manual
Hide thumbs

Advertisement

Quick Links

MULTIPLE COMPACT DISC PLAYER
CD-2280M/DPF-J9010
INSTRUCTION MANUAL
KENWOOD CORPORATION
This unit is designed for home use only. If the unit is
used in a location other than at home, such as in a
shop (for commercial use), in a car or in a ship, etc.,
and is damaged, a service fee may be charged even
during the warranty period.
This instruction manual is used for two models.
Model availability and features (functions) may differ
depending on the country and sales area.
About the DTS multi-channel audio format
The DTS multi-channel audio format is available on CD,
LD and DVD software. DTS is a strictly digital format
and can not be decoded inside most CD, LD or DVD
players. For this reason, if you attempt to listen to DTS
encoded software through the analog output of your
new CD player, you will experience digital noise. This
noise can be quite loud if the analog output is con-
nected directly to a high power amplification system.
Proper precautions should be taken to avoid this situ-
ation. To enjoy DTS Digital Surround playback, an ex-
ternal 5.1 channel DTS Digital Surround decoder sys-
tem must be connected to the digital output (S/PDIF,
AES/EBU, or TosLink) of the CD player.
COMPACT
DIGITAL AUDIO
B60-3474-08 00 (K, P, X, T) AP

Advertisement

Table of Contents
loading

  Related Manuals for Kenwood CD-2280M

  Summary of Contents for Kenwood CD-2280M

  • Page 1 For this reason, if you attempt to listen to DTS encoded software through the analog output of your new CD player, you will experience digital noise. This noise can be quite loud if the analog output is con- nected directly to a high power amplification system.
  • Page 2: Introduction

    Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit. Introduction CD-2280M/DPF-J9010 (En) (Except for some areas) CLASS 1 LASER PRODUCT...
  • Page 3: Table Of Contents

    This unit can accommodate up to 200 discs and can be used like a home jukebox. This unit consists of two CD player mechanisms and an indepen- dent second output (OUTPUT-B) for simultaneous playback of two discs. This makes it possible to enjoy different music in different rooms, by listening to the playback of a disc on Mechanism-A in Room A and that of a disc on Mechanism-B in Room B, for example.
  • Page 4: Important Items

    CD, LD or DVD players. For this reason, if you attempt to listen to DTS encoded software through the ana- log output of your new CD player, you will experience digital noise. This noise can be quite loud if the analog output is con- nected directly to a high power amplification system.
  • Page 5: Disc Handling Precautions

    1000 hours of use, although this period may vary depending on the installation condition (temperature, humidity, dust, smoke, etc.) of the unit. The unit has inspected, please consult your dealer or a KENWOOD service center in your area. Note related to transportation and movement...
  • Page 6: System Connections

    Audio cord Audio cord Note on the SL-16 TEXT jack When using a KENWOOD Receiver equipped with the SL-16 TEXT jack, connect it to the Receiver using the communication cord provided with this unit. This makes it possible to display the disc and track titles on the LCD remote control unit (provided with the Receiver).
  • Page 7: Connection To Digital Amplifier Or Md (Output-A Only)

    2. Do not connect system control cords to any components other than those specified by KENWOOD. It may cause a malfunction and damage your equipment. 3. Be sure the system control plugs are inserted all the way in to the system control terminals.
  • Page 8: Controls And Indicators

    # Stop key (7) $ LCD remote control signal transmitter The disc and track title data are output to the LCD remote control unit (provided with a KENWOOD Receiver) through this window. % DISPLAY key Switching between title display and time display.
  • Page 9: Operation Of Remote Control Unit (Mechanism-A Only)

    REPEAT key, RANDOM key, DISPLAY key 2 Insert batteries. ÷ Insert two AA-size (R6) batteries as indicated by the polarity making. CD-2280M/DPF-J9010 (En) 6 Keys related to program and file registration MODE key Used for music type file and title name registration and playback.
  • Page 10: Preparation

    ÷ When a title name has been registered and the door panel is closed, reading operation is performed automatically. DISPLAY-A : The display flashes. CD-2280M/DPF-J9010 (En) The slot No. is displayed when the DISC SKIP knob is turned. Insert discs with the label on the right side. Playback is not possible when a disc is inserted the other way round.
  • Page 11: Selecting Mechanism A Or B

    To display the title name on a LCD remote control unit (provided with a KENWOOD Receiver), perform the all data read operation first, and operate the LCD remote control unit with the door left closed. For the operation of the LCD remote control unit, refer to the instruction manual provided with your receiver.
  • Page 12: Normal Play (Track Mode)

    Press the SUB OUT MONITOR key to output the audio played on Mechanism-B from OUTPUT-A. Each press of the key switches this feature on and off alternately. DISPLAY-A ÷ This operation is not available during the continuous play mode. Normal play (TRACK mode) CD-2280M/DPF-J9010 (En)
  • Page 13: Direct Disc Selection (Mechanism-A Only)

    : Keys and controls used in the operations described on this page. The input method for this product is of two different types. One can either use the traditional KENWOOD +10 key approach, or direct numeric input. ' , : ? !
  • Page 14: Playback From Desired Track

    ÷ Repeat step 2 when it is required to change the track number. Searching ¢ To skip forward ÷ Playback starts from the position where the key is released. Normal play (TRACK mode) CD-2280M/DPF-J9010 (En) ¡ Backward search Forward search CURSOR...
  • Page 15: Displays

    ÷ This operation is not available during the continuous play mode. Jump To end ALL INFORMATION during display Press the MODE key. CD-2280M/DPF-J9010 (En) Track title display (with CD-TEXT or when the track title has been registered) DISC NO., TRACK NO. display...
  • Page 16: Programming Tracks In Desired Order (Pgm Mode) (Mechanism-A Only)

    ÷ When the 4 or ¢ key is pressed during playback, the track will be skipped in the direction of the pressed button. For continuous playback Press the CONTINUOUS PLAY key. (PGM mode) (Mechanism-A only) CD-2280M/DPF-J9010 (En)
  • Page 17: To Check The Programmed Tracks

    ÷ Press it while the “PGM01” indicator blinks. ÷ The track being played cannot be changed. To clear all tracks ÷ When the P.MODE key is pressed during playback, playback in order of tracks starts from the track being played. CD-2280M/DPF-J9010 (En) CHARACTER/ P.MODE...
  • Page 18: Repeated Playback (Repeat Mode)

    ON status can be set REPEAT to OFF (or vice versa). ÷ The operation is not available during the continuous play mode. To cancel repeated playback Press the REPEAT key twice. (REPEAT ON § ¶ CD-2280M/DPF-J9010 (En) OFF) OFF)
  • Page 19: Playback In A Random Order (Random Mode)

    For continuous playback (ALL DISC RANDOM only) Press the CONTINUOUS PLAY key. To cancel random playback ÷ Press the 7 key to stop playback. ÷ Normal playback will be performed when RANDOM OFF is selected. § CD-2280M/DPF-J9010 (En) RANDOM < < > <...
  • Page 20: Registration Of Title Name

    ÷ To register another track titles in the same disc, go to step 1-2 in “To enter the track title“. Registration of Title Name CD-2280M/DPF-J9010 (En) : Keys and controls used in the operations described on this page. DISPLAY-A : The display flashes.
  • Page 21 ÷ Input the entire track title by repeating 2 and 3 for each character. ÷ Up to 20 track titles can be registered per disc by repeating steps from 1-2 to 4 for each. To exit title name mode Press the MODE key. Registration of Title Name CD-2280M/DPF-J9010 (En) = > Flashing cursor...
  • Page 22: To Change Or Delete A Title Name

    DELETE/ CLEAR ÷ When a title name is to be deleted, delete all characters one by one. Registration of Title Name CD-2280M/DPF-J9010 (En) : Keys and controls used in the operations described on this page. = > = > Flashing cursor...
  • Page 23: To Change The Character Type

    Each press switches the modes as follows: 1 Insert mode 2 Overwrite mode Insert mode Overwrite mode Registration of Title Name CD-2280M/DPF-J9010 (En) = > Capital letters : ABC...XYZ... = > Small letters : abc...xyz... = > Numbers/symbols : 0 1 2 3...7 8 9 space ! "...
  • Page 24: Listening To Music By Genre (Music Type Mode)

    DISPLAY-A : The display flashes. ÷ The disc number can be selected directly by using the numeric keys in ∞ DISC SKIP 5 place of the DISC SKIP keys. Next disc Listening to music by genre (MUSIC TYPE mode) CD-2280M/DPF-J9010 (En)
  • Page 25: To Delete The Registered Music Type

    ÷ To register another music type file, repeat the procedure from step 2. To quit MUSIC TYPE mode Press the MODE key. § DISPLAY-A CLEAR Listening to music by genre (MUSIC TYPE mode) CD-2280M/DPF-J9010 (En) Alternative Rock Children’s Music Contemporary Christian Country Folk Gospel...
  • Page 26: Playing The Music Type File (Mechanism-A Only)

    Press the RANDOM key. ÷ Select “RANDOM OFF” to quit random playback. For continuous playback Press the CONTINUOUS PLAY key. To quit MUSIC TYPE mode Press the MODE key. DISPLAY-A Listening to music by genre (MUSIC TYPE mode) CD-2280M/DPF-J9010 (En)
  • Page 27: Listening To Your Favorite Titles (Best Selection Mode) (Mechanism-A Only)

    For continuous playback Press the CONTINUOUS PLAY key. To quit BEST SELECTION mode Press the 7 key during playback. ÷ The recorded contents remain stored even when best selection mode is quit. DELETE/ DISPLAY-A CLEAR CD-2280M/DPF-J9010 (En)
  • Page 28: Continuous Playback

    ÷ When the door panel is opened, the continuous play mode is released and playback also stops. To quit continuous play mode Press the CONTINUOUS PLAY key. § ¶ Continuous playback CD-2280M/DPF-J9010 (En) : Keys and controls used in the operations described on this page.
  • Page 29: Registration Of Dts Discs

    ÷ To register another DTS disc, repeat the procedure from step 3. To quit DTS ANALOG MUTE mode Press the MODE key. Each press switches the modes as follows: 1 MUTE ON 2 MUTE OFF To quit DTS ANALOG MUTE mode Press the MODE key. CD-2280M/DPF-J9010 (En)
  • Page 30: Timer Operation (Mechanism-A Only)

    ÷ Read the instruction manual of the timer carefully. ÷ When the set time comes, playback will start automatically. Timer operation CD-2280M/DPF-J9010 (En) Audio timer 12:00 To AC outlet Amplifier or receiver...
  • Page 31: In Case Of Difficulty

    ÷ Disc is cracked. ÷ Oscillation is applied to this unit. ÷ MUSIC TYPE mode is selected. ÷ The TIMER PLAY switch is set to ON. CD-2280M/DPF-J9010 (En) Remedy ÷ Replace with new batteries. ÷ Operate the remote control unit within the controllable range.
  • Page 32: Specifications

    Power consumption ... 14 W Dimensions Weight (Net) ... 9.0 kg (19.8 lb) 1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. Notes Notes 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).

This manual is also suitable for:

Dpf-j9010