Repeated Playback - Kenwood DP-M6650 Instruction Manual

Repeated playback
■ Repeated playback
Repeated playback of programmed tracks
1 Enter the PGM mode.
I PGM I indicator lights up.
2 Select the desired track(s).
(Refer to page 16.)
0 Select the desired disc.
Repeated playback of the whole CDs
*| Make sure the IPGMI indicator is extinguished.
IPGMI indicator goes off.
(D Select the desired tracks.
• If the IPGMI indicator is lighted, press the IP.MQDEI key.
2 Press the REPEAT key.
> When you want to repeat only one track, go to step 3 below.
► Repeat steps © and ® to program up to 20 tracks.
3 Press the REPEAT key.
IREPEATI indicator lights up.
4 Start playback.
» All of the selected tracks will be played repeatedly.
► If only one track is selected, that track will be played
repeatedly.
IREPEATI indicator lights up.
3 Start playback.
» All tracks on all discs in the magazine and Plus 1 tray will be
played repeatedly.
To resume normal playback
->
Press the IREPEATI key again.
3- D Q
3-C O
a _
1-!-IREPEATI indicator ooas off
_
• The playback will be resumed under the CD player mode set
before the repeat.
18
DP-M6650/DP-M5550 (En)