Removing The Jumper Cables - Lincoln 1998 Mark VIII Owner's Manual

Removing the jumper cables

1. Remove the jumper cables in
reverse order. Take the cable off the
metallic surface (1) first, followed
by the cable on the negative (-)
booster battery terminal (2).
2. Remove the cable from the
positive ( +) terminal of the booster
battery (3) and then the discharged
battery (4).
3. After the disabled vehicle has
been started, allow it to idle for a
while so the engine can "relearn" its
idle conditions.
Roadside emergencies
4
1
+
2
3
121