Connecting Wires To Terminals - Kenwood KDV-MP735 Instruction Manual

Connecting Wires to Terminals

FM/AM antenna input
��� ����
��� ����
Wiring harness
(Accessory1)
Motor antenna control wire (Blue)
Power control wire (Blue/White)
Line mute wire (Brown)
Dimmer control wire (Orange / White)
Ignition wire (Red)
���
Battery wire (Yellow)
����
Ground wire (Black) - (To car chassis)
AUX left input (White)
AUX right input (Red)
Video output for front seats (Yellow)
����� ��� �����
����� ��� ����
����� �
����� �
���� �
���� �
������
���� �
��� �� Parking sensor wire
(Green)
If no connections are made, do not
let the wire come out from the tab.
���� ����
������
����
������
White/Black
White
Gray/Black
Gray
Green/Black
Green
Purple/Black
Purple
Car fuse box
ACC
Fuse (10 A)
Video output for rear seats (Yellow)
Front left output (White)
Front right output (Red)
Rear left output (White)
Rear right output (Red)
Center output (Gray)
Subwoofer output (Brown)
Connection cable (Green) (Accessory5)
To parking brake detection switch
harness of car
Depending on what antenna you are using, connect either to
the control terminal of the motor antenna, or to the power
terminal for the booster amplifier of the film-type antenna.
When using the optional power amplifier, connect to its power
control terminal.
Connect to the terminal that is grounded when either the
telephone rings or during conversation. To connect the
KENWOOD navigation system, consult your navigation manual.
To car light control switch
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
Ignition key
switch
�
�
Monitor unit for
front seats.
Video cable (Accessory7)
For the sake of safety, be sure to
connect the parking sensor.
Car fuse box
(Main fuse)
Battery
English
35
|