Table of Contents
Advertisement
NOTE
>
When using 3-inch wide media, change the Centering Position in the Menu
Settings to Mode 1. If the Centering Position is not set to 1, it will result in
Paper Jam.
>
When loading envelopes, set the head gap based on the thickness of the
overlapped and glued areas of the envelope and not the thin area. This
will prevent dark printing in some areas on the envelope.
>
Do not use glossy paper if it is not tested thoroughly. This type of paper is
left with marks from the paper feed roller or from rubbing. Also, the paper
may not feed properly, causing incorrect line spacing.
>
Using Seal-type cards (for example to print bank/credit card balance
statements) may cause ink to transfer when the printed sides overlap.
Test it thoroughly to ensure it does not cause problems.
>
Do not use Labels in individual sheets as the printing is not
guaranteed. Test thoroughly before use.
>
Be careful when using Labels as they may peel of their carrier
sheet if the adhesive is not strong. This can result in paper jam.
Feed Labels from the Front Tray instead of the Top Tray, as
feeding from the top may cause the Labels to peel off and cause
paper jams.
For information on using Envelopes, Labels and Card stock paper, refer to the Technical Reference
Guide.
CAUTION!
Paper handling > 35
Advertisement
Table of Contents
