Av Interface; Displaying The Av I/F 1 Screen - Kenwood XXV-05V Instruction Manual

Setup Menu

AV Interface

You can set audio and visual (AV) interface parameters.

Displaying the AV I/F 1 screen

AV Interface
AV I/F 1 screen
4
1
3
2
1
72 English
5
6
N N rma No Normal ma mal
7
8
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
3 Calls the Sound Effects Menu. (see page 86)
4 Calls the Setup Menu.
5 Selects a navigation system connection. (
1
"RGB" :
5
"AV-IN1": Allows a third-party navigation system to
6
"OFF" :
7
8
1
6 Sets a name to be displayed when you select a
9
system that is connected via the AV INPUT1 port.
( VIDEO1)
If you have set the navigation system connection to
"AV IN1", the display is fixed to "NAV".
7 Sets an image display of the system that is
connected via the AV INPUT2 port. (
"Normal" :
"AUTO":
"R-ViewCAM": An image entered via the AV INPUT2
8 Sets a name to be displayed when you select an
image of the system that is connected via the AV
INPUT2 port. (
If you have selected the "R-ViewCAM" display for
the AV INPUT2 port, the "R-ViewCAM" is always
selected.
9 Displays the AV I/F 2 screen.
AV Interface
If
or
Allows the Kenwood's Navigation System
to connect via its interface cable.
connect via the AV INPUT1 port.
Must be used if no navigation system is
connected. (The navigation display is
cancelled when the AV source is
switched.)
When the image source is switched,
an image entered via the AV INPUT2
port is displayed.
When an image signal is entered via
the AV INPUT2 port, this image is
displayed.
port is displayed when the shift lever
of the car is placed in the Reverse
position.
VIDEO2)
is not shown, touch
to display it.
Next
RGB)
Normal)
Prev.