Approved Batteries - Fluke 28 II Ex Getting Started

Replace the batteries as follows, refer to Figure 3:
1. Turn the rotary switch to OFF and remove the test
leads from the terminals.
2. Remove the six Torx-head screws from the case
bottom and remove the battery door ().
Note
When you lift the battery door, make sure the
rubber gasket stays attached to the battery
compartment barrier.
3. Remove the three batteries and replace all three with
AAA Alkaline batteries ().
4. Make sure the battery compartment gasket () is
properly installed around the outside edge of the
battery compartment barrier.
5. Align the battery compartment barrier with battery
compartment while you replace the battery door.
6. Attach the door with the six Torx-head screws.
Note
It is recommended the batteries be removed
from the Product for long periods of storage.
Shop for Fluke products online at:
Duracell Procell MN2400 LR03
Duracell Plus MN2400 LR03
Max Tech No. 4703
Industrial Alcaline No. 4003
Eveready Energizer No. E92
Rayovac Alkaline AAA (U.S.
Type)
Panasonic LR03XWA
Minimum operating temperature is -10 °C.
[1]
MyFlukeStore
www. .com
True-rms Digital Multimeter
Table 7. Approved Batteries
Battery Description
[1]
1.877.766.5412
Maintenance
Manufacturer
Duracell
Varta
Eveready
Rayovac
Panasonic
19