Pushbuttons - Fluke 28 II Ex Getting Started

Switch
Button
Position
Set to capacitance

 Set to temperature

 Turn on ac low-pass filter
(Yellow)

Set dc or ac current
 Set dc or ac current
Any Change and set the range for the set function. To go to autoranging, hold the button down for
position 1 second.
C
Sets to °C or °F.
M
Any AutoHOLD (formerly TouchHold) captures the current measurement on the display. When a
position new, stable measurement is sensed, the Product beeps and shows the new measurement.
MIN MAX
Stops and starts recording. Does not erase recorded values.
D
recording
Frequency
Stops and starts the frequency counter.
counter
Shop for Fluke products online at:
Table 4. Pushbuttons
Function
MyFlukeStore
www. .com
True-rms Digital Multimeter
1.877.766.5412
Features
11