Safety Information; Ex Safety Information - Fluke 28 II Ex Getting Started

28 II Ex
Getting Started

Safety Information

The Product complies with:
•
ISA-82.02.01
•
CAN/CSA-C22.2 No. 61010-1-04
•
IEC Standard No. 61010-1:2001
•
Measurement Category III, 1000V, Pollution
Degree 2
•
Measurement Category IV, 600V, Pollution
Degree 2
•
Industrial use in potentially explosive areas of
zone 1, 2, 21, 22, or MI, in accordance with
ATEX requirements (ATEX 137) (see the EX
safety instructions & regulations section)
In this manual, a Warning identifies conditions and
actions that can be dangerous to the user. A Caution
identifies conditions and actions that can cause damage
to the Product or the equipment under test.
Symbols used on the Product and in this manual are
explained in Table 1.
To ensure safe operation of the Product, obey all
instructions and warnings contained in this manual.
2
MyFlukeStore
www.
Shop for Fluke products online at:

EX Safety Information

Note
Go to www.ecom-ex.com
download the EC declaration of conformity and
Ex certificate for this product. You can also order
them from Fluke.
This manual contains information and safety regulations
that must be followed for safe, reliable operation of the
Product in hazardous areas under the described
conditions. Failure to follow the information and
instructions can have dangerous consequences, or may
contravene applicable legislation.
Please read through this manual before you start to use
the Product.
If there is a question (because of translation and/or
printing errors), refer to the English manual.
1.877.766.5412
.com
or www.fluke.com