Setting The Recording Parameters - Gigaset C610IP User Manual

•

Setting the recording parameters

The answering machine has already been preset at the factory. You can configure
individual settings via the handset.
¢ ¢
v Ì
Recordings
¤
You can enter data in the following fields:
Length:
Select a maximum recording time of 1 min., 2 min., 3 min. or Maximum.
Quality:
Select Excellent or Long Play recording quality. If the quality is higher, the max-
imum recording time is reduced.
Ring Delay:
Select when the answering machine should accept a call:
Immediately, after 10 sec., 18 sec., 30 sec. or Automatic.
§Save§
Press the display key.
Information about ring delay
In Automatic mode, the following applies for ring delay:
u
If there are no new messages, the answering machine answers a call after
18 seconds.
u
If new messages are present, the answering machine answers a call after 10 sec-
onds.
When operating remotely
there are no new messages (otherwise the answering machine would have already
accepted your call). There are no call charges if you hang up now.
Please note:
You can configure your telephone so that the first ringtone is suppressed on all
¢
page 104). This means that the time set for the ring delay predetermines
calls (
how long the caller must wait before the answering machine accepts the call (not
how long it rings).
Operating the Gigaset C610A IP base answering machine
¢
( page 130), you can tell after approx. 15 seconds that
129