Gigaset C610IP User Manual page 143

Changing the destination number saved
É
¢
v
Additional Features
¤
Enter and save number as described in
entering the destination
Cancelling/deactivating the room monitor
Press the end call key a to cancel the call when the room monitor is activated.
In idle status, press the display key
Deactivating the room monitor remotely
Prerequisites:
u
The telephone must support tone dialling
u
The room monitor call is diverted to an external destination number.
u
If room monitor is activated via a VoIP connection, the DTMF signalling must be
done via SIP info or RFC2833
¤
Accept the call from the room monitor and press keys 9 ;.
The room monitor function will deactivate after the call ends. There are no further
room monitor calls. The other room monitor settings on the handset (e.g., no ring-
tone) remain activated until you press the display key
To reactivate the room monitor function with the same phone number:
¤
Reactivate and save with
Using a handset as a room monitor (Babyphone)
¢
Room Monitor
"Activating the room monitor and
¢
number" ( page 140).
§OFF§
to deactivate room monitor mode.
¢
( page 194).
¢
§Save§
( page 140).
§OFF§
on the handset.
141