Gigaset C610IP User Manual page 64

Making calls using network services
Diverting calls internally
You can divert all external calls intended for a receive connection on the handset
to a different handset.
¢
v Ç Select Services
Internal
¤
You can enter data in the following fields:
Activation
Activate/deactivate call divert.
To Handset
Select internal party.
No Handset is displayed if internal call divert has not been set previously or if the
previously set handset is no longer registered.
Ring Delay
If you prefer to have a delay before the call is diverted, select the length of the
delay (None, 10 sec., 20 sec. or 30 sec.). If you select None, the call is not sig-
nalled on the handset and is diverted immediately.
§Save§
Internal call divert is only single-stage i.e., if calls for the handset are diverted to a
different handset (e.g., MT1) on which a call divert is also active (e.g., to MT2), this
second call divert is not activated. The calls are signalled on handset MT1.
Please note
u
Any call for the handset that has been diverted is entered in the call lists.
u
If a call to a receive connection that is only assigned to the handset is
diverted to a handset that is not available (e.g., the handset is deactivated),
the call is rejected after a short time.
62
¢
Call Divert
§OK§
Select and press .
Press the display key.