Ford 1961 Comet Service Specifications Handbook page 31

AUTOMATIC TRANSMISSION
CHECKS AND ADJUSTMENTS
OPERATION SPECIFI CATION
Transmission End Ploy 0 .020-0.039 inch
Ch eck Selective Thrust Wash e rs
Availabl e:
0.068 inch, 0.075 inch
0.084 inch, 0.093 inch
~
--
Turbin e and Stator End 0.060 inch (maximum)
Ploy Ch eck
-
low Bond Adjustment
Adjust sc rew to 10 Ibs. ft.
torque , and bock off two
full turns. lock nut to 35-
40 Ibs. ft .
-
Reverse Bond Ad just screw to 45-50 Ib s.
Adjustment
in torque, and bock off
two turn s. lock jam nut
to 15- 1 8 Ibs. ft.
Acce lerator Pedal 4 inches above floor
mot.
Height Adjustment
--
Anti-Stoll Do shpot
0 .130-0. 150 inch.
Clearance
TORQUE VALUES
NOTE: All specifications are given in pounds-foot
unless otherwise noted.
By-Pass Tube Fittings .............. .. ... . . .. . " 9-12
Case Gouge Hole Plugs . . . . . . . . . . . . . . . . . . . . . .. 10-15
Control Assembly to Case Bolts . . . . . . . . . . . . . . . . .. 8 - 10
Control Assembly Stop Plate and
End Plate Screws . . . . . . . . . . . . . . . . . . .. 20-30 lbs. In.
Control Upper Body to lowe r Body Bolts . . . . . . . . . .. 6-7
C-26