Ford 1961 Comet Service Specifications Handbook page 145

LUBRICANTS AND CAPACITIES
LUBRICATION POINTS
LUBRICANT
Front Wheel Bearings
Wheel Bearing Grease
8l-19585
Universal Joints
lubricant C 1 MY-19A61 O-A
Distributor:
Cam lobes Cam lubricant
Oil Cup Engine Oil (SAE 10)
Cam Oil Wick Engine Oil (SAE 10)
Air Conditioning
Compressor Suniso 5G or Capella "E" (If
neither of two oils are avail-
ab le, use Suniso 4G or
Capella "D".)
Engine Engine Oil-
Classification MS
*
Capacity:
223 C.I.D. Eng ine
5 Quarts Including Oil Filter
292, 352, and
390 C.I.D.
Engines 6 Quarts Including O il Filter
TEMPERATURE RANGE
VISCOSITY
+ 70°F. and Above SAE 30 or lOW -30
+32 °F. to +70°F. SAE 20, 20W, or 10W-30
- 10 ° F. to + 32 °F.
SAE lOW, 5W-20, or 10W-30
- 10° F. and Below SAE 5W or 5W-20
*Only those oils which have been tested and certified by
the marketer as satisfying the engine operating sequences
(defined by ASTM Committee D-2 Section G IV of Technical
Committee B and pub lished in the SAE Handbook, 1960
Edition, describing minimum requirements for API o il
cla ssification "For Service MS") should be used.
M-88