Do you have a question about the WB 10F and is the answer not in the manual?
Questions and answers
Joan C Lewis
May 31, 2025
How can I get a certificate of origin for my Walker Bay 10?
1 comments:
Mr. Anderson
May 31, 2025
To obtain a certificate of origin for your Walker Bay 10F, you need the Manufacturer’s Statement of Origin (MSO). This document should be transferred to the new owner and stored in a safe place. If you do not have it, contact the dealer where you purchased the boat or Walker Bay directly.
**Maximum speeds are estimates. Actual top speed will vary depending on For information on RID kits go to www.walkerbay.com type, make and model of motor and load in boat. The Walker Bay 8 and 10 hulls are displacement hulls, not planing hulls.
You will need it to register your boat with your state or province. Hand - The hull of the Walker Bay 8 and 10 is a classic Displacement Hull. the MSO to the new owner if you sell the boat. If your MSO is lost or stolen - Displacement hulls are recognized for their great rowing and sailing contact Walker Bay at info@walkerbay.com for a replacement.
- This boat is not a toy. Adult supervision advised. - Refer to diagram B for capsize recovery procedure. - The minimum crew mass for righting a Walker Bay boat is 40 Kg. FAQ? Will my boat sink if it is swamped or fills with water? CHECKLIST BEFORE OPERATING Answer: No.
Many Walker Bay boaters use their boat only in the motoring or sailing configurations so oars are not included with the boat. For the best rowing experience we recomment the Walker Bay rowing kit.
TRANSPORTING BY ROAD LIFTING EYES - Lifting eyes can be added quickly and easily to your Walker Bay 8 or 10 WARNING without any drilling. - Simply replace 4 of the 1/4” #20 bolts securing the front and rear seats Risk of automobile accident, injury or loss of life in case of loss of with 1-1/2”...
Carry appropriate safety equipment such as but not limited to: Walker Bay uses only stainless steel, anodized or powder coated - Coast Guard approved lifejackets or personal flotation devices for aluminum metal parts. Nuts, bolts and other metal components may each passenger** show signs of corrosion.
EMERGENCY PROCEDURES RENDERING ASSISTANCE (USA) WARNING United States Code, Title 46 states that “The owner operator of a vessel is required by law to render assistance to any individual or vessel in dis- LOSS OF POWER tress, so long as his vessel is not endangered in the process.” - Drop anchor.
ASSEMBLY INSTRUCTIONS - WALKER BAY 8 - WB 8S PARTS LIST Boat and seats packed separately, some assembly required. Safety and Conformity Assessment Certification only applicable if assembly instructions are followed correctly. Step Description Bow Seat Mid Seat Stern Seat...
ASSEMBLY INSTRUCTIONS - WALKER BAY 10 - WB 10F PARTS LIST Boat and seats packed separately, some assembly required. Safety and Conformity Assessment Certification only applicable if Step Step assembly instructions are followed correctly. Remove and Description discard skid plate.
Page 12
Step Step Step Step Step Loosely attach front corner blocks. Tighten once rear corner blocks have been installed. Step Page 11...
Need help?
Do you have a question about the WB 10F and is the answer not in the manual?
Questions and answers
How can I get a certificate of origin for my Walker Bay 10?
To obtain a certificate of origin for your Walker Bay 10F, you need the Manufacturer’s Statement of Origin (MSO). This document should be transferred to the new owner and stored in a safe place. If you do not have it, contact the dealer where you purchased the boat or Walker Bay directly.
This answer is automatically generated