Walker Bay 8 Owner's Safety Manual & Assembly Instructions
Boats
Hide thumbs
Also See for 8:
- Assembly instructions manual (8 pages) ,
- Owner's safety manual & assembly instructions (16 pages)
Advertisement
Quick Links
Walker Bay 8 Owner's Safety Manual & Assembly Instructions
WALKER BAY 8
!
WARNING
PARTS LIST
(Specifications and contents subject to change without notice)
Boat may be packed in two or three separate packages,
some assembly required.
Safety and Conformity Assessment Certification is
only applicable if assembly instructions are followed
correctly.
Description
A. Foam Plug ........................................................
B. Keel Plate
(white 17010, sand 17011, blue 17014)
C. Keel Plate Screw (#14 x 3/4") x 2 .....................
D. Bow Eye Assembly...........................................
E. One Way Drain Plug Assembly.........................
F.
Bow Seat
(blue 28050, green 28052, yellow 28053, teal 28054, sand 28055, grey 28056)
G. Stern Seat
(blue 28011, green 28012, yellow 28013, teal 28014, sand 28015, grey 28016)
H. Bolt (1/4"-20 x 1-1/4") x 16................................
I.
Washer (1/4") x 24 ............................................
J.
Hex Nut x 20 .....................................................
K. Mid Seat
(blue 28031, green 28032, yellow 28033, teal 28034, sand 28035, grey 28036)
L. Bolt (1/4"-20x1-1/2") x 8....................................
M. Motor Mount Plates..........................................
N. Nyloc Nut x 4 ....................................................
O. Oarlocks x 2 ......................................................
P. Oarlock Socket Adaptors x 2 ............................
Q. Oars x 2 ............................................................
R. Oar Blades x 2 ..................................................
S. Oar Collars x 2..................................................
T.
Oar Collar Nails (large x 6, small x 8) ...............
U. Seat Plug .........................................................
Tools Required for Assembly:
1. Nut Driver, 7/16" (included)...............................
2. Screw Driver, Phillips (not included)
®
Part #
#16013
#11015
#21042
#23036
#11046
#11080
#11061
#11050
#23000
#11060
#17045
#17046
#99230
#99270
#17043
#11115
#24060
#11070
Advertisement
Related Manuals for Walker Bay 8
Summary of Contents for Walker Bay 8
- Page 1 Q. Oars x 2 ............#99230 R. Oar Blades x 2 ..........#99270 S. Oar Collars x 2..........#17043 Oar Collar Nails (large x 6, small x 8) ....#11115 U. Seat Plug ............#24060 Tools Required for Assembly: 1. Nut Driver, 7/16” (included).......
-
Page 2: Parts List
#17046 R. Dagger Cap (blue 18240, sand 18241, grey 18242) S. Oars (blades 99270, shafts 99231, collars 17043) Oar Collar Nails (large x 6, small x 8)....#11115 U. Front Corner Blocks ... (port 18266, starboard 18264) Bolt (1/4”-20 x 1-1/2”) x 2 ........ - Page 3 • Do not use the boat under the influence of drugs or alcohol. Sail Kits and Accessories Optional sail kits are available for the Walker Bay 8 and Walker Bay 10, in Load Distribution and Passenger Positioning addition to a range of functional accessories including boat covers, bimini tops, Load distribution is critical for safety and performance in all small boats.
-
Page 4: Diagram A: Correct Seating Positions
DIAGRAM A: CORRECT SEATING POSITIONS DIAGRAM B: RIGHTING YOUR BOAT AFTER CAPSIZE... - Page 5 WALKER BAY 8 To avoid leaking, make sure rubber gasket is installed correctly and bolts are tight. The drain must be securely plugged with the bung before launching boat. WALKER BAY 10 To avoid leaking, make sure rubber gasket is installed correctly and bolts are tight.