General Faq's; How To Dim The Display; What To Do With A Blank Screen; Unable To Enter A Postcode For Wales Or Scotland But English Postcodes Are Ok - Kenwood DNX4210BT-OP Easy Setup Manual

General FAQ's

How to Dim the Display

Note: this adjustment needs to be carried out separately for navigation and each source
•
Press the [SCRN] button
•
Then set the [Dimmer] option to OFF
Set up the brightness, contrast and black level controls to the desired level for daylight
o
conditions
Note: in some sources, such as video, it is also possible to adjust colour, tint and sharpness
•
Set the [Dimmer] to ON
Set up the same controls for night time driving
o
•
Set the [Dimmer] to either 'SYNC' or 'NAV-SYNC' – this determines when the screen will switch to
night mode.
SYNC = when the car's lights are turned on
NAV-SYNC = at sunset

What to do with a Blank Screen

If the screen has gone blank, but the buttons are still illuminated and sound continues to play, then try holding
down the [TEL] button for about a second. This operation switches the screen off or on
It is also possible to get a blank screen if you select [VIDEO] from the Top Menu: selecting this source
switches to the video input, but if there is no video signal present, then you will get a blank screen – in this
case, just press the [Menu] button and select another source.
If the screen has gone blank, but also button illumination has switched off and there is no sound playing (i.e.
system has switched off) – it is possible that the system has been manually turned off by holding down the
[Menu] button. If you do this, you will need to manually turn the system back on by pushing the [Menu] button
once (with the ignition on).
If all else fails please try pressing the reset button (you need a pen for this)
The reset button on the DNX4210BT/DAB is the red illuminated triangle.
Unable to Enter a Postcode for Wales or Scotland but English
Postcodes are OK
Press [NAV], then press [Where To?] > [Address] > [Change Country] – change the country to 'United
Kingdom'
My iPod Icon has Disappeared from the Top Menu, Instead I have
Video 1 and Video 2 Icons
Disconnect the iPod from the system
Press [Menu] > [Standby] > [SETUP] > [Source] > [AV IN SET-UP]
Change the setting called "iPod AV Interface Use" to "iPod"
22
8
Chapter