Appendix; Updating The Software; Updating The Map Data; Safety Cameras - Kenwood DNN9150BTM Instruction Manual

Appendix

This appendix provides additional information about your navigation system, such as how to update the
software and map data.

Updating the Software

Before you can update the navigation system
software, you must have a USB mass storage
device and an Internet connection.
1 Go to www.garmin.com/kenwood.
2 Select Update.
3 Follow the on-screen instructions.

Updating the Map Data

You can purchase updated map data from Garmin
or ask your Kenwood dealer or Kenwood service
center for details.
1 Go to www.garmin.com/kenwood.
2 Select Update.
3 Follow the on-screen instructions.

Safety Cameras

WARNING
Garmin and JVC KENWOOD are not responsible for
the accuracy of, or the consequences of using, a
safety camera database.
Safety camera information is available in some
locations. Go to http://my.garmin.com
availability. For these locations, the navigation
system includes the locations of hundreds of
safety cameras. Your navigation system alerts you
when you are approaching a safety camera and
can warn you if you are driving too fast. The data
is updated at least weekly, so you always have
access to the most up-to-date information.
You can purchase a new region or extend an
existing subscription at any time. Each region that
you purchase has an expiration date.
30 GPS Navigation Instruction Manual

Custom POIs (Points of Interest)

You can manually load custom points of interest
(POI) databases, available from various companies
on the Internet. Some custom POI databases
contain alert information for points such as safety
cameras and school zones. The navigation system
can notify you when you approach one of these
points. You are responsible for ensuring that your
use of safety camera information is lawful in your
area.
WARNING
Garmin and JVC KENWOOD are not responsible for
the consequences of using custom POI databases,
or for the accuracy of custom POI databases.
After downloading your POI database, use the
Garmin POI Loader to install the POIs onto a
USB mass storage device. Use the USB mass
storage device to load the POIs. The POI Loader is
available at
/poiloader. Refer to the POI Loader Help file for
more information; click Help to open the Help
file.
⁄
• Each time you load custom POIs to the navigation
system, any other custom POIs already saved in the
system will be overwritten.

Finding Custom POIs

for
1 Select Where To? > Categories > Custom
POIs.
2 Select a category.
www.garmin.com/products