Transport - HYOSUNG GV250 Ei Owner's Manual

Digital instrument panel
Hide thumbs Also See for GV250 Ei:
Table of Contents

Advertisement

WARNING
Performing the spark test improperly
can be hazardous.
You could get a high voltage electrical
shock or an explosion if you are not
familiar with this procedure.
Do not perform this check if you are not
familiar with the procedure.
Keep the spark plug away from the
spark plug hole during this test. Do not
this test if you have a heart condition or
wear a pacemaker.
ENGINE STALLING
1. Check the fuel supply in the fuel tank.
2. Check the ignition system for intermittent
spark.
3. Check the idle speed.
CAUTION
When occur any trouble, the best way is
to consult your Hyosung dealer for
repairs.

TRANSPORT

WARNING
Before transporting the motorcycle, it is
necessary to empty the fuel tank
completely, making sure that it is
completely dry.
During transport, the motorcycle must
be firmly secured in an upright position
to avoid fuel and oil leaks.
DRAINING THE FUEL TANK
WARNING
Keep the fuel tank away from fires.
Allow some time for the engine and
muffler to cool down completely.
Fuel vapours are harmful to human
health.
Ensure the area is well ventilated before
proceeding.
Do not inhale fuel vapours.
Do not smoke, nor use naked flames.
Place the motorcycle on the center
stand on firm and level ground.
Stop the engine and wait until it has
cooled down.
Prepare a container large enough to
hold the fuel in the tank and place it on
the floor on the left side of the
motorcycle.
Remove the fuel tank cap.
Drain fuel using a manual pump or
similar system.
Do not damage the fuel pump assembly
(fuel level gauge accommodated inside
the tank).
WARNING
Refit the fuel tank cap after draining all
fuel.
85

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gv125

Table of Contents