HYOSUNG GV250 Ei Owner's Manual page 75

Brake shoes wear limit
These motorcycles are equipped with the
brake shoes wear limit indicators on the rear
brakes.
To check wear of the brake shoes,
perform the following :
1. Check if the brake system is properly
adjusted.
2. While fully applying the brake, check to
see that the extension line of the index
mark is within the range on the brake
panel.
3. If the extension line is beyond the
range, have the brake shoes assembly
replaced by your Hyosung dealer to
ensure safe operation.
WARNING
Riding with worn brake shoes will
reduce braking performance and will
increase your chance of having an
accident.
Inspect brake shoes wear before each
use. Ask your Hyosung dealer or
qualified mechanic to replace brake
shoes if the shoes are worn to the limit.
Rear brake lamp switch
The rear brake lamp switch is located at
right-side of the engine.
Move the switch up or down to adjust it
until the switch operates and turns on the
brake lamp after the brake pedal begins to
be depressed.
74