Table of Contents
Advertisement
WARNING
Checking maintenance items when the
engine is running can be hazardous.
You could be severely injured if your
hands or clothing gets caught in moving
engine parts.
Shut the engine off when performing
maintenance checks, except when
checking the lamp, engine stop switch
and throttle.
WHAT TO
CHECK
Smoothness
Steering
No restriction of movement
No play or looseness
Correct play in the
throttle cable
Smooth operation and
Throttle
positive return of the
throttle grip to the closed
position
Correct lever play
Clutch
Smooth and progressive
action
Proper operation
Fluid level in the reservoir
to be above "LOWER" line
Correct pedal and lever
play
Brakes
No "sponginess"
No fluid leakage
Brake pads and shoes not
to be worn down to the
limit line
Suspension
Smooth movement
Enough fuel for the
planned
operation
Fuel hoses connected
Fuel
securely
No damage to fuel tank or
cap
Tank cap closed securely
CHECK FOR :
distance
WHAT TO
CHECK
Gerashift
lever
Drive
chain
Tires
Engine oil
Lamp
Horn
Rear-view
mirror &
Reflector
Engine
stop switch
Side stand /
lgnition
interlock
switch
General
condition
The engine and muffler are too hot
right after engine stopped, please be
careful not to be burned.
of
Don't inspect the engine indoor
where there is little or no ventilation
available. The exhaust gas is
extremely poisonous.
53
CHECK FOR :
No damage lever
Smooth operation
Correct tension or slack
Adequate lubrication
No excessive wear or
damage
Correct pressure
Adequate tread depth
No cracks or cuts
Correct level and pollution
degree of engine oil
No engine oil leakage
Operation of all lamps and
indicators
Correct function
No dust or damage
Correct function
Proper operation
Bolts and nuts are tight
No rattle from any parts of
motorcycle
with
engine running
No visible evidence of
damage
CAUTION
the
Hide quick links:
Advertisement
Table of Contents
