HYOSUNG GV250 Ei Owner's Manual page 83

LICENSE PLATE LAMP'S BULB
REPLACEMENT
1. Remove the three nuts from the bottom
of the seat tail cover.
2. Remove the brake & tail lamp cover.
3. Pushing in the bulb, turn it to the counter-
clockwise, and pull it out.
4. After stick in the new lamp, assemble the
lens.
CAUTION
Overtightening the screws may cause
the lens to crack.
FUSE
The fuse boxes are located behind the
front seat. If the engine suddenly stops
running or any electrical system fails to
operate then the fuses must be checked.
In case a fuses blow there is a 30 A for
main and 15 A for head lamp spare fuse.
30 A main fuse protects all electrical
circuits.
15 A head lamp fuse protects the head
lamp and high beam indicator lamp.
CAUTION
Never use other than specified 30 A or
15 A fuse.
Installing a fuse of incorrect rating may
seriously damage the electrical system.
You should consult your Hyosung
dealer or a qualified service mechanic
immediately.
82