Table of Contents
Advertisement
On-Chip Primary PCI IDE
The integrated peripheral controller contains an IDE interface with support
for two IDE channels. Select Enabled to activate each channel separately.
Setting: Disabled, Enabled (Default).
IDE Primary Master/Slave PIO
It allows your system HDD controller to run faster.
Rather than having the BIOS issue with a series of commands that
transferring to or from the disk drive, PIO (Programmed Input/Output) allows
the BIOS to communicate with the controller and CPU directly.
When Auto is selected, the BIOS will select the best available mode.
Setting: Auto (Default), Mode 0, Mode 1, Mode 2, Mode 3, Mode 4.
IDE Primary Master/Slave UDMA
It allows your system to improve disk I/O throughput to 33MB/sec with the
Ultra DMA33 feature.
Setting: Disabled, Auto.
On-Chip Serial ATA
Setting: Disabled
Auto
Combined Mode
Enhanced Mode
(Default)
SATA Only
SATA PORT Speed Settings
Setting: Disabled (Default), Force GEN I, Force GEN II.
PATA IDE Mode
Setting: Secondary (Default).
ITX-i9453 User's Manual
Disabled SATA controller
Auto arrange by BIOS.
PATA and SATA are combined. Max.of 2
IDE drives in each channel.
Enable both SATA and PATA. Max. of 6
IDE drivers are supported.
SATA is operating in legacy mode.
BIOS
41
Advertisement
Table of Contents
